◇ 哎．瘋．人．網 ◇

網站現已遷移至新的版面 Apple.ORG.HK Apple人網

◇ 哎．瘋．人．網 ◇ Unlock◇哎瘋解鎖◇ 顯示適合列印的版本寄給朋友

作者

iPhone 強化器 iTweak v2.30 - Activation, 一click解鎖, 香港電話格式, YouTube, 中/英文介面轉換

希利

文章: 8

于 2007-10-10 07:58

i have the same problem too, can someone please help? thanks alot!

iczfirz

網主

文章: 2332
來自: 地點不須介意

你今日Pwn左未呀~~~~

于 2007-10-10 08:05

hazycheung wrote:

masterjim wrote:
想請問執行iTweak 去整youtube時佢問我選
1-method-1
2-method-2
3-back to main menu
method1同2有咩分別?我要點選呢?

If method 1 no good then method 2.
All you can do is try.

^{別人或奴役我但不會創造我最後發現不想工作亦要工作
三十一畫：此數大吉，名利雙收，漸進向上，大業成就。（吉）}

banana123

文章: 20

于 2007-10-10 10:16

gary wrote:

tbear wrote:
救命.....
到這再unlock唔到.....
請救命...
點用bbupdater方法變直佢???

Because your iPhone is already unlocked!!!!!

To resume your phone feature, do a factory restore with iTune, that's all.

Hello guys + GARY,

I have the same screen after running AnySim..
First time ran AnySim, it say:
" Unlock Failure - The flash operation succeded but ..... check the baseband manually using minicom"

So, i restore the phone using Itune and try to run AnySim again, but this time at the end of the process it say:
"couldn't locate bytes to pach"

Questions:
1. Now what should i do, Can you please give me more detail instructions?
you say, do "factory restore", then what else?
(ie. press shift + click "restore" then run itweak to activiate again?)

2. What is the status of my phone? according to my reading, the phone is so call "unlocked", correct?

using Itune 7.3.1
Iphone version 1.0.2
itweak 2.30
XP

many thanks!

banana123

文章: 20

于 2007-10-10 11:00

moming2k wrote:

angusyyn wrote:

gary wrote:

angusyyn wrote:
係呀, 希望 iTweak version 2.4 可以加入 Factory Restore 同 relock 功能, 救救我們這些 unlock 失敗的人, 得物冇得用真係好慘呀!

What is your "Unlock" fail problem?

我部機其實已activate 及 unlock 一切安好, 用了一個星期. 星期一想打電話時, 發現 "Incorrect SIM - Insert an unlocked and valid SIM to activate iPhone".立即restart 都唔得. 返屋企做過 itune restore, 唔得, 做埋 Factory Restore, activate, unlock 都唔得, 出現 "unable to locate bytes to patch"
家陣入返張 AT&T card 入去, 用itune做完 Restore 佢都話要入返張 AT&T card 入去activate 部機, Signal 只有 "----", setting 中也沒有 Carrier 選項, 搞了兩天還不能解決問題, 身心皆疲, 心情沮喪...

不過人間有情, iczfirz兄仗義幫我睇下有冇得救, 哎．瘋．人．網不單只有 iPhone高手, 仲好有人情味, 難得難得...
我部機返生有望哪.

firmware version: 1.0.2 (1C28)

唔駛 unlock 多次架喎，
依家應該要 restore 返原本個 baseband firmware ，再 unlock 多次？

Hello guys!

I have the "unable to locate bytes to patch" problem too.
You say " 唔駛 unlock 多次架喎，依家應該要 restore 返原本個 baseband firmware ，再 unlock 多次 "

you say "唔駛 unlock 多次" but you also say "再 unlock 多次" ?? meaning?

can you explain more? how to restore orginal baseband firmware?
what software/files to use and what are the steps?
ex. how to use "bbupdater"?

ex.
do i need to restore factory firmware (hold shift + click restore in itune)
then run Itweak to activiate... then whats next?

thanks

banana123 修改于 2007-10-10 11:20

masterjim

文章: 15

于 2007-10-10 11:15

我想問'Auto-Correction' 係咩黎?有咩用??

banana123

文章: 20

于 2007-10-10 11:38

masterjim wrote:
我想問'Auto-Correction' 係咩黎?有咩用??

"Auto Correction"係幫你打字打錯左小小果陣佢會同你改番岩..

anybody help me? i have UNLOCK problem (same with many member):

" Unlock Failure - The flash operation succeded but ..... check the baseband manually using minicom"
So, i restore the phone using Itune and try to run AnySim again, but this time at the end of the process it say:
"couldn't locate bytes to pach"

banana123 修改于 2007-10-10 11:42

bchan

文章: 53

于 2007-10-10 13:05

banana123 wrote:

masterjim wrote:
我想問'Auto-Correction' 係咩黎?有咩用??

"Auto Correction"係幫你打字打錯左小小果陣佢會同你改番岩..

anybody help me? i have UNLOCK problem (same with many member):

" Unlock Failure - The flash operation succeded but ..... check the baseband manually using minicom"
So, i restore the phone using Itune and try to run AnySim again, but this time at the end of the process it say:
"couldn't locate bytes to pach"

i got the same problem as well.
i just complete the steps in iTweak (those reboots) even i got " Unlock Failure - The flash operation succeded but ..... check the baseband manually using minicom"

Then it works with my sim card.

Also one of my fd reports that..
if u got the msg above.
try to go to www.iphone.org.hk to download the anySim again and unlock again

banana123

文章: 20

于 2007-10-10 14:44

bchan wrote:

banana123 wrote:

masterjim wrote:
我想問'Auto-Correction' 係咩黎?有咩用??

"Auto Correction"係幫你打字打錯左小小果陣佢會同你改番岩..

anybody help me? i have UNLOCK problem (same with many member):

" Unlock Failure - The flash operation succeded but ..... check the baseband manually using minicom"
So, i restore the phone using Itune and try to run AnySim again, but this time at the end of the process it say:
"couldn't locate bytes to pach"

i got the same problem as well.
i just complete the steps in iTweak (those reboots) even i got " Unlock Failure - The flash operation succeded but ..... check the baseband manually using minicom"

Then it works with my sim card.

Also one of my fd reports that..
if u got the msg above.
try to go to www.iphone.org.hk to download the anySim again and unlock again

Hi bchan,

thank you for your reply.

Can you tell me more how it is done?
I need more detail (step by step) . please help

ok, after the first trail ... I had the annoying " Unlock Failure - The flash operation succeded but ..... check the baseband manually using minicom" message.

So i restore the phone and did the Itweak again. Did you do that too? if you do, you know, it will give another annoying message about "cannot find byte to pach" right?

Now i am stuck at this part. what should i do next?
Should I ... restore the phone and run itweak entire procedure (1) + (2)again?or should I ... just run itweak (1) ...and try something else? how did you do it?

please help! appriciate your kindness.

i-shark

文章: 5

于 2007-10-10 21:24

hi 各位師兄，唔知有無人知道乜野係TTY呢？呢個係電話setting入面搵到的，我開左之後其實一直都無乜野特別反應，反而昨日係機場打電話時，個哎瘋就問我係選用TTY or 語音，一離開左機場就無啦！請問有無師兄知道呢？

banana123

文章: 20

于 2007-10-11 18:19

banana123 wrote:

bchan wrote:

banana123 wrote:

masterjim wrote:
我想問'Auto-Correction' 係咩黎?有咩用??

"Auto Correction"係幫你打字打錯左小小果陣佢會同你改番岩..

anybody help me? i have UNLOCK problem (same with many member):

" Unlock Failure - The flash operation succeded but ..... check the baseband manually using minicom"
So, i restore the phone using Itune and try to run AnySim again, but this time at the end of the process it say:
"couldn't locate bytes to pach"

i got the same problem as well.
i just complete the steps in iTweak (those reboots) even i got " Unlock Failure - The flash operation succeded but ..... check the baseband manually using minicom"

Then it works with my sim card.

Also one of my fd reports that..
if u got the msg above.
try to go to www.iphone.org.hk to download the anySim again and unlock again

Hi bchan,

thank you for your reply.

Can you tell me more how it is done?
I need more detail (step by step) . please help

ok, after the first trail ... I had the annoying " Unlock Failure - The flash operation succeded but ..... check the baseband manually using minicom" message.

So i restore the phone and did the Itweak again. Did you do that too? if you do, you know, it will give another annoying message about "cannot find byte to pach" right?

Now i am stuck at this part. what should i do next?
Should I ... restore the phone and run itweak entire procedure (1) + (2)again?or should I ... just run itweak (1) ...and try something else? how did you do it?

please help! appriciate your kindness.

*********************************************************************************
Hello guys!

First i like to thank iczfirz and louis for helping my with the problem! my iphone is now working and youtube working and chinese SMS all working.
many thanks for the detailed steps to help me out.

another proud Iphone owner

imprezaringo

文章: 2

于 2007-10-13 11:07

Hi, Everyone!!

I got a problem with iTweak v 2.30
My iPhone is unlock already with version 1.02.

But when I connect to PC using iTweak, it has a message "Please connect your iphone 1st to PC 1st"...."Press any key" .....The windows of iTweak is closed.

Does anyone have this problem before? Or did I miss some steps here?
Thankx!!

dill9394

文章: 2

于 2007-10-16 13:09

banana123 wrote:

banana123 wrote:

bchan wrote:

banana123 wrote:

masterjim wrote:
我想問'Auto-Correction' 係咩黎?有咩用??

"Auto Correction"係幫你打字打錯左小小果陣佢會同你改番岩..

anybody help me? i have UNLOCK problem (same with many member):

" Unlock Failure - The flash operation succeded but ..... check the baseband manually using minicom"
So, i restore the phone using Itune and try to run AnySim again, but this time at the end of the process it say:
"couldn't locate bytes to pach"

i got the same problem as well.
i just complete the steps in iTweak (those reboots) even i got " Unlock Failure - The flash operation succeded but ..... check the baseband manually using minicom"

Then it works with my sim card.

Also one of my fd reports that..
if u got the msg above.
try to go to www.iphone.org.hk to download the anySim again and unlock again

Hi bchan,

thank you for your reply.

Can you tell me more how it is done?
I need more detail (step by step) . please help

ok, after the first trail ... I had the annoying " Unlock Failure - The flash operation succeded but ..... check the baseband manually using minicom" message.

So i restore the phone and did the Itweak again. Did you do that too? if you do, you know, it will give another annoying message about "cannot find byte to pach" right?

Now i am stuck at this part. what should i do next?
Should I ... restore the phone and run itweak entire procedure (1) + (2)again?or should I ... just run itweak (1) ...and try something else? how did you do it?

please help! appriciate your kindness.

*********************************************************************************
Hello guys!

First i like to thank iczfirz and louis for helping my with the problem! my iphone is now working and youtube working and chinese SMS all working.
many thanks for the detailed steps to help me out.

another proud Iphone owner

hi banana123, im the new iphone user too, and i have the same problem like u,can i ask u how u fix ur problem.
my problem is the first time i did all the step and end up w/ "cannot find byte to pach"
today i do all the step again,w/ the same messgae again but it says my iphone is now unlock.
but when i put my t-mobile sim card in it,it has no signal,and couldnt press dial at all.
but i could dial *3001#12345#*, at the field test i cannot touch any other option like network info,cell info,gprs info.......only i could select versions..inside the version, the Firware version is empty <---is this normal??
please any brother can help me.
thanks very much!!!!

cjhxz

文章: 1

于 2007-10-16 17:57

Help!!!

My iphone was activated before with a software named"iphone unlock toolkit". Wifi/ipod/camera/Safari are okay. But it can't work with phone call and Youtobe. The firmware version is 1.0.0

Today I restore my iphone to 1.0.2. Then i run itweak 2.30. Then AppTapp Installer ran. I quit itunes and checked V1.0.2 to continue. Then it show "downloading iphone 1,1_1.0.2_1C28_restore.ipsw". But finally a message pop up show "Download failed: connecting to host".

How can I do?

Please help!!

Thanks!

jimmy83j

文章: 28

于 2007-10-16 21:25

del

jimmy83j 修改于 2010-10-26 20:59

timlo

文章: 52

于 2007-10-17 01:07

我成功將 1.1.1 downgrade 到 1.0.2 同解鎖

但係我想改做中文介面, 我想問下iTweak v2.30 - 24-Sep-2007 可唔可以用係 downgrade 左又解銷左既 iphone?

同我可唔可以downgrade 完成後唔解鎖住

真接用iTweak v2.30 做餘下解鎖動作?

因為我唔知係咪講緊原裝 1.0.2 先用得iTweak v2.30 定down 左 grade 就用得

一萬個唔該.

◇ 哎．瘋．人．網 ◇ Unlock◇哎瘋解鎖◇ 顯示適合列印的版本寄給朋友

看過的文章

新的文章

被刪除的文章

跳轉到

[錯誤信息]

Table './iphone1/ut_online' is marked as crashed and should be repaired

請通知討論區管理員 <kk@hkfoot.com>。